A puncture repair that works on butyl tubes, latex tubes, and tubeless tires. A lightweight foam that is easy to use and less messy than liquids. It will fit both Presta and Schrader valves. Alternatively, you can use Pitstop to preempt flats by loading a new tire. Tubes and tubulars can continue to be used normally after application. - Kit includes one 75ml can of Pit Stop Road and a strap to fix it to the seat post
$10.99 - $19.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz
Topeak's Road MasterBlaster is spring loaded to fit on your frame without any clamps or brackets and its aero aluminum barrel might even speed you up! Plus, the Master sports an aluminum thumblock that fits all valves, an integrated dust cap and padded ends that won't scratch your frame.
Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.
The longest and slimmest version in the DA pump series fills high-pressure road tires fast. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120 psi / 8 bar. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta with integrated dust cap - BARREL / THUMB LOCK: Aluminum - HANDLE: Plastic - CAPACITY: 120 psi / 8 bar - VOLUME PER STROKE: 66.9 cc (pull + push) - SIZE: 25.8 x 3.2 x 2.8 cm / 10.2” x 1.3” x 1.1” - WEIGHT: 118 g / 4.16 oz Added Features - Dual-action pumping head - Side-mount bracket
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.
Gear up with the CK-6 Combo Kit, featuring the Serfas FP-35 Floor Pump & compact Mini Pump. It's the perfect starter kit for inflating your tires and changing flats on the road. Includes: - FP-35 Floor Pump - Mini Pump - 6 Piece Mini Tool - 2 Tire Levers - Medium Saddle Bag - Ballistic Nylon Bottle Cage
The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?
It’s a CO2 & a mini tool all in one! Features: - Tools Included: 8, 6, 5, 4, 3, 2.5 & 2mm Allen Keys, Phillips & Flathead Screwdrivers, T25 - CO2 Inflator Built Into Tool - Presta & Schrader Valve Compatible Specs: - Number Of Tools: 11 - Weight: 136 Grams
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
With a forged alloy lock lever, a CNC-machined head and a bamboo handle, the Little Silver is a functional work of art, just like you'd expect from Portland Design Works. This compact hand pump fits easily in your jersey pocket or backpack and is compatible with both Presta and Schrader valves. - Ideal for high pressure/low volume (road and city bike tires) - Includes updated composite pump mount - Weight: 86 g (3 oz) - Length: 190 mm (7.5")
$9.99 - $49.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
The Airlift 200 is a single action bike pump that is compact enough to keep on hand anytime and anywhere. It has a large chamber to fill tires fast and a pump handle that locks in place for extra security. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Pump handle locks into place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount
The Airlift 210 is a single action road bike pump that is small enough to take on the next race. It has a lightweight alloy body with a sleek design that won't slow riders down. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Rubber seal holds pump handle in place - Includes a frame mount and two 4mm bolts - Pumps up to 160 psi maximum pressure
LESS IS MORE. Don’t let getting your bike ready get in the way of taking off. The Control Tower 2 provides the stability and power you need to get your tires where you like them in no time flat. The proven AutoHead is compatible with most common tire valves and the 3-inch gauge makes it easy to read up to 180psi. - Easy-to-read 3" gauge - Comfortable handle with solid steel barrel design - AutoHead design - 180 psi rating
- Everything you need for a quick fix on the road - 3 tire levers - Patch Kit - 9-function multi-tool - CO2 inflator with 2 16g CO2 cartridges - Seat bag
- Includes everything for a quick fix while on or off-road - Liv seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool
Classic shock. The new Control Shock 1 features a classic 1.6” analog classic design with 400psi maximum pressure. Two-stage valve technology ensures that you won’t lose air when disconnecting the pump. And our extended valve head design makes it easier to access tight valve locations. Features - CNC machined aluminum barrel - Aluminum housing and gauge - 1.6” diameter pressure gauge - Air pressure release button - Extended Valve Head Design - Two Stage Valve - 400psi Max
Giant's Control Mini CO2 Pump boasts a lightweight aluminum barrel that doubles as a micro-sized pump and CO2 inflator. It holds two CO2 cartridges when attached to your bike with the mount, handles all valve types, and pumps up to 120psi into your tires.
Giant's Control Mini MTB Pump boasts a lightweight, durable telescoping aluminum barrel that inflates even the widest mountain bike tires quickly. It has a thumb-lock head that works on all valve types and inflates up to 90 psi.
Giant's Control Mini MTB+ Pump boasts a lightweight, durable CNC-machined aluminum barrel that's a large diameter so that it can pump up even the widest mountain bike tires quickly. Plus, this mighty mini features a hose that makes pumping easier, hides inside for a clean look, and works on all valve types.
Page 1 of 2 Next page