Stems

A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.

3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design

Origin-8's Pro Fit Alloy Ergo Stem is a great upgrade for road and mountain bikes. It's 3D forged from lightweight and durable 6061-T6 aluminum. It has a 4-bolt, 2-piece face clamp that shaves grams and makes for quick and easy handlebar installation/removal. Plus, the opposing steerer clamp bolts apply more even holding force to protect the fork and keep your bars from changing position.

Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.

MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation

• 3D forged 6061 aluminum body with oversize box cross-section • ± 8° requires fewer spacers • 46mm wide 6061 aluminum faceplate • Steel hardware

Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g

The Deda Elementi Zero1 stem is the perfect combination of stiffness, lightness and aero shape. The Zero1 stem is made of 6061 aluminum series and is manufactured using an innovative 3D forging process. The flat top section of the stem perfectly matches the modern road bikes design. Designed for the most exigent riders at an unbeatable quality to price ratio. Available from size 70 mm to 130 mm and BOB (black on black) finish.

This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

3D forged from 6061-T6 aluminum with titanium hardware 35mm clamp bore for use with oversized handlebars. Fork Diameter: 1-1/8" Length: 90 Bar Clamp: 35mm Angle: +/-6° Color: Black Material: AL6061

Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt

Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes

Velo Orange Removable Faceplate Quill Stem. For any classic roadie, tourer, mtb, or any other bike with a 1-inch threaded steerer. These stems feature a simple 2-bolt removable faceplate for use with any handlebars including modern bars with 31.8mm clamp diameters. The 90 degree extension gives a bit of rise without looking out of place on a custom build. - Height above insert: 130mm - Use shims for 25.4 handlebars (sold separately)

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel

Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp

Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork

It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design

Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction. - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - S.H.I.S. Stem Clamp Diameter: 28.6

Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp

Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.

TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.

TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.

The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.

Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.

• Forged aluminum • 2-bolt clamp • 180mm tall

• Forged aluminum • 2-bolt clamp • 180mm tall

Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

- Adjustable top mounted threadless stream - Adjustable from 0 to 60 degrees - Available in two lengths - Material: Alloy

• Forged aluminum • Single-bolt clamp • 180mm tall