Tools

- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles - AM5201: spanner wrench for Crossfire and universal 4-slot freewheels - AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels - AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels

- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles - AM5201: spanner wrench for Crossfire and universal 4-slot freewheels - AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels - AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels

Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place. Features: - New and Improved - 20mm of Adjustment - Single Axle Position - Slotted for Dropout - ED Black Hardware - Anodized Finish Specs: - Axle Size 10mm (3/8") only - Material 6061-T6 Aluminum - Hardware - Stainless Steel

Box Two Chain Tensioners let you dial in your chain tension, so it's just right. Two mounting holes provide room for ample adjustment on most frames. When used correctly, Box Two Chain Tensioners help protect frame dropouts and keep your rear wheels locked in place where they should be. Features: - New and Improved - 30mm of Adjustment - Dual Axle Position - Anti-Rust Hardware - Anodized Finish Specs: - Axle Size 10mm (3/8") only - Material 6061-T6 Aluminum - Hardware - Stainless Steel

Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel. When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox. Features: - New and Improved - 45mm of Adjustment - XO Skeleton Design - Dual-Sided Adjustment Grid - Dual-Color Adjustment Block Specs: - Axle Size: 10mm (3/8") only - Material: 7075-T6 Aluminum - Hardware: Stainless Steel

- Set contains 9 CrMo wrenches with satin chrome finish plus ABS T-handles - 25 degree angle entry offers easy access, even in tight spaces - Set includes: 2mm—150 x 60mm, 2.5mm—150 x 60mm, 3mm—150 x 60mm, 4mm—150 x 60mm, 5mm—200 x 75mm, 6mm—200 x 75mm, 8mm—200 x 78mm, 10mm—200 x 78mm, T25—150 x 60mm

- Tire levers for use on both tubed and tubeless tires and wheels - Features a curved edge which mates up with wheels, providing more contact - Designed with both a spoke hook and a rim clip to hold lever in place when needed, preventing slippage - Includes 3 levers

Link Pliers

- Metric and Imperial readings up to 3m/10ft in length - Stainless steel construction with polymer housing

Diagonal Pliers

- A Y-wrench that features a swivel sleeve that allows the tool to rotate freely around the center point - Features a magnetic panel to enable fast storage on metallic objects such as a work stand - Available as: 4/5/6mm hex key, 4/5/6mm ball point hex key, T10/T25/T30mm Torx key, or 2/2.5/3mm hex key

Rotor Truing Fork

The Birzman Housing and Cable Cutter provides great handling comfort and is designed to offer additional leverage strength. The integrated awl helps restore cut housing ends, clearing the way for smooth cable operation.

- Lockring sockets for various E-Bike drive units - Constructed from CNC machined alloy steel - 1/2" drive compatible

- Easily removes 1 to 1 1/2" headset cups and BB30 as well as PF30 bottom bracket bearings

- Set contains 9 CrMo wrenches with satin chrome finish plus ABS T-handles - 25 degree angle entry offers easy access, even in tight spaces - Set includes: 2mm—150 x 60mm, 2.5mm—150 x 60mm, 3mm—150 x 60mm, 4mm—150 x 60mm, 5mm—200 x 75mm, 6mm—200 x 75mm, 8mm—200 x 78mm, 10mm—200 x 78mm, T25—150 x 60mm

- 1/4" drive torque wrench (3-15Nm) and bit sockets - Sockets include: 3/4/5/6/8mm hex, T25, and 90mm extension bar

- Freewheel remover for use with single speed 4-key freewheels - Can be used with a 24mm wrench - Compatibility: 4-Key

- For use on 8-key single speed freewheels - Tool Type: Freewheel Remover - Compatibility: 16-22T smallest cog (Gray) - Compatibility: 13-14T smallest cog (Silver)

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

13 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 13 functions - 145 grams

Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap

Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs

Remember that time on the trail when your brake lever reach went out of whack? Unfortunately, your multi tool couldn't get out of it's own way to turn the adjustment screw. Blackburn's Wayside Multi Tool changes all of that. - Individual Hex Keys - The most common hex keys snap on and off the tool and can be used individually to be able easily reach and properly torque any bolt head. All keys feature a ball end. - Optimized Tools - The selection, length and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 19 functions - 200 grams / 0.44 lbs

Designed for the tensioning of saddle tops and hightening clip bolts of saddles. The Brooks Spanner works on most models of Brooks saddles with the following exceptions: Swallow Titanium, Swift Titanium, B33, B135 and B190

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

- Professional wrenches fit internal nipples on many deep section aero rims

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - This professional tool is designed for precise fit and prevents rounding of nipples - Metal nipple interface contacts nipple on all four surfaces - Fits 3.25mm square nipple interface